Stainless steel gear oil pump for soybean oil , material: pump body, pump cover, impeller, etc. All parts contacting with materials according to customer’s requirements by: SS304, SS316, SS316L, SUS304, SUS316, SUS316L and stainless steel.The pump diameter has: 1 inch, 2 inch, 3 inch, 4 inch, 6 inch, 8 inch, 10 inch, 14 inch and so on.
Structural characteristics:
Stainless steel gear pump is composed of gear, shaft, pump body, safety valve and shaft end seal.The gear has hardness and strength after heat treatment, and is installed with the shaft in a replaceable shaft sleeve.The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.There are oil drain and oil return groove in the pump, is the gear in the work to bear the torque force is small, so the bearing load is small, small wear.
Stainless gear oil pump for soybean oil is provided with a safety valve as overload protection, the total backflow pressure of the safety valve is 1.5 times of the rated discharge pressure of the pump, can also be adjusted in the allowable discharge pressure range according to the actual needs.However, please note that this safety valve cannot be used as a pressure reducing valve for a long time.From the shaft overhang end to the pump, for clockwise rotation.
Stainless steel gear oil pump for soybean oil Performance parameters:
| Model | Caliber (Inch) | Flow (L/min ) | Pressure (MPa ) | Suction Lift (m ) | Motor power (KW ) |
| ZCK18.3 | 3/4 | 18.3 | 1.45 | 5 | 1.5 |
| ZCK33.3 | 3/4 | 33.3 | 1.45 | 5 | 2.2 |
| ZCK55 | 1″ | 55 | 0.33 | 5 | 1.5 |
| ZCK83.3 | 1 1/2″ | 83.3 | 0.33 | 5 | 2.2 |
| ZCK135 | 2″ | 135 | 0.33 | 5 | 4 |
| ZCK200 | 2″ | 200 | 0.33 | 5 | 4 |
| ZCK300 | 3″ | 300 | 0.33 | 5 | 5.5 |
| ZCK483.3 | 3″ | 483.3 | 0.33 | 5 | 7.5 |
| ZCK483.3 | 3″ | 483.3 | 1.0 | 5 | 11 |
| ZCK633 | 4″ | 633 | 0.28 | 5 | 11 |
| ZCK960 | 4″ | 960 | 0.3 | 5 | 18.5 |
| ZCK1200 | 6″ | 1200 | 0.6 | 3 | 37 |
| ZCK1600 | 6″ | 1600 | 0.6 | 3 | 45 |
| ZCK1800 | 8″ | 1800 | 0.6 | 2.5 | 55 |
| ZCK2500 | 8″ | 2500 | 0.6 | 2.5 | 75 |
| ZCK3800 | 10″ | 3800 | 0.6 | 2 | 110 |
| ZCK5400 | 10″ | 5400 | 0.6 | 2 | 110 |
| ZCK7600 | 14″ | 7600 | 0.6 | 2 | 200 |
| ZCK9600 | 14″ | 9600 | 0.6 | 2 | 250 |
ZCK stainless steel gear pump features:
1, the pump structure is simple and compact, easy to use and maintain.
2. With good self-imbibition, it is not necessary to infuse liquid before each pump.
3, lubrication is automatically achieved by the delivery of liquid, so there is no need to add additional lubrication fluid in daily work.
4, the use of elastic coupling to transfer power to compensate for small errors caused by the installation.In the oil pump work by the inevitable hydraulic impact, can play a good buffer.
Install stainless steel gear pump:
A. Before installation, check whether the pump is damaged in transportation, such as whether the motor is damp, whether the dust cover at the pump inlet and outlet is damaged and whether dirt enters the pump chamber.
B. Clean the inner wall of the pipe with clean water or steam before installing the pipe.Installation should avoid the weight of the pipe to be borne by the pump, so as not to affect the accuracy and life of the pump.
C. The gear oil pump should be as close to the oil pool as possible;No leakage of air or liquid is allowed in the connection parts of the pipeline, or the phenomenon of not absorbing liquid will occur.
D. In order to prevent dirt such as particles and impurities from entering the pump, a metal filter screen should be installed at the suction inlet with a filtration accuracy of 30 mesh /in, and the filtration area should be more than three times larger than the cross-sectional area of the inlet pipe.
E. It is recommended to install vacuum gauge and pressure gauge for inlet and outlet pipeline to monitor the working status of the pump.
F. When the oil pool is deep, the suction pipe is long or the medium viscosity is high and the vacuum degree is too high, the inlet pipe can be thickened.When the suction pipe is longer, the bottom valve should be installed.
Stainless steel gear pump before work inspection:
A. Whether the fasteners of the pump are firm or not.
B. Whether the rotation of the driving shaft is uniform in weight.
C. Whether the valve in and out of the line is open.
D. Whether the rotation direction of the pump meets the requirements.
E. Proper amount of medium should be injected into the pump before the first use.
Maintenance of stainless steel gear pump during operation:
A. Note that the readings of the pressure gauge and vacuum gauge of the gear oil pump shall be within the specified technical specifications of the pump.
B. When the gear oil pump has abnormal noise or excessive temperature rise during operation, the pump should be stopped immediately for inspection.
C. In general, the safety valve should not be adjusted arbitrarily. If adjustment is needed, the safety valve should be calibrated with an instrument.Make the cut-off pressure of the relief valve a pump
D. 1.5-2 times rated pressure.
Stop the pump
A. turn off the power.
B. Close inlet and outlet valves.
Stainless Gear Oil Pump For Soybean Oil，What is soybean oil ?
Soybean oil is an oil extracted from soybeans by pressing. It is often referred to as “soybean salad oil” and is one of the most commonly used cooking oils.The longest shelf life of soybean oil is only one year, the better the quality of soybean oil should be lighter color, light yellow, clear and transparent.And there is no sediment, no bean odor, temperature below zero degrees Celsius below the high quality soybean oil will have grease crystallization.