YCB20 YCB40 YCB50 gear pump parameters
YCB20 YCB40 YCB50 gear pump inlet and outlet is 80mm,Flow:20m3/h,Head:0.6MPA,With 7.5KW-6P-960RPM;
Material: cast iron or stainless steel. Seal: mechanical seal or gland seal.
YCB40 gear pump inlet and outlet is 125mm, Flow:40m3/h,Head:0.6MPA,With15KW-6P-960RPM;
Material: cast iron or stainless steel. Seal: mechanical seal or gland seal.
YCB50 gear pump inlet and outlet is 125mm,50m3/h,Head:0.6MPA,With 22KW-6P-960RPM;
Material: cast iron or stainless steel. Seal: mechanical seal or gland seal.
YCB gear pump is introduced and characteristics
YCB20 YCB40 YCB50 gear pump suitable for conveying viscosity for 5 * 10-6-1.5 * 10-3 m2 / s (5-1500 CST), with the fuel lubricity, using special seal can make the medium Temperature of 280 ℃.Such as delivery without lubrication oils, beverages, low corrosive liquid to choose material of stainless steel pump.delivery Low viscosity liquid, such as gasoline, benzene to choose copper round arc gear pump.
YCB gear pump structure characteristics This series gear pump are mainly gear, shaft, pump body, valve, the shaft end seal.Gear after heat treatment with high hardness and strength, and the shaft Installed inside the replaceable shaft sleeve.In all parts of the lubrication pump are pump work automatically to achieve using the output media.
YCB20 YCB40 YCB60 gear pump with valve as overload protection, Ann’s total reflux valve pressure is 1.5 times the rated to pump out, can also be used In allow discharge pressure range according to the actual need additional adjustments.But pay attention to the safety valve cannot be a long-term work, pressure reducing valve in the line when necessary Shall be installed.