2CY gear pump discharge pressure is less than 2.5mpa, and the materials are cast iron or stainless steel.
2CY gear pump applications
Suitable for conveying containing no solid particles and fibers, non-corrosive, 2cy gear pump used in the temperature is not higher than 120 ℃, the viscosity (5 to 1500 CST) the nature of the lubricating oil or other similar oil liquid and used for hydraulic rotation system.
2cy gear pump structure and installation
Main components:
Left, right, pump cover, pump body, master, passive gear shaft, shaft sleeve, oil seal and other parts.
1, the unit shall be installed in a horizontal cement, on the basis of land use fixed bolt.
2, should right coupling coaxial, after the installation is complete, turn the coupling confirmed after running smoothly without negative pressure phenomenon, may run into.
3, the pump is not suitable for conveying impurity oil, therefore, at the inlet pipe should be set oil filter.
4, pump steering regulation: look from the pump to the motor, the direction of rotation is counterclockwise.
2cy gear pump parameters
|
Model |
Flow |
Speed |
Head |
Motor |
||
|
m3/h |
L/min |
KW |
Model |
|||
|
2CY-1.08/2.5 |
1.08 |
18 |
1420 |
2.5 |
2.2 |
Y100L1-4 |
|
2CY-2.1/2.5 |
2.1 |
35 |
1420 |
2.5 |
3 |
Y100L2-4 |
|
2CY-3/2.5 |
3 |
50 |
1440 |
2.5 |
4 |
Y112M-4 |
|
2CY-4.2/2.5 |
4.2 |
70 |
1440 |
2.5 |
5.5 |
Y132S-4 |
|
2CY-7.5/2.5 |
7.5 |
125 |
1440 |
2.5 |
7.5 |
Y132M-4 |
|
2CY-12/2.5 |
12 |
200 |
1460 |
2.5 |
15 |
Y160L-4 |