Stainless Steel Direct Connection Centrifugal Pump Select material: SS304, SS316, SS316L, SUS304, SUS316, SUS316L;It is widely used in medicine, chemical industry, daily chemical industry, food, beverage, environmental protection, electric crossing, bleaching and dyeing, sewage treatment and other industries.
Stainless Steel Direct Connection Centrifugal Pump Summary:
Stainless steel direct connection centrifugal pump, the use of high quality stainless steel as the main material, to the west Germany advanced technology of the mechanical seal as the shaft seal, to transport different media, we use the semi-open and closed structure of two different impeller, pump and motor connection method using direct connection.The pump has excellent structure, reliable corrosion resistance, good sealing performance, easy to use and maintain, low energy consumption, the conveying temperature is not higher than 90℃ (direct connection), containing (not containing) fine soft particles or fiber, with corrosive or sanitary liquid ideal choice.
Stainless steel direct centrifugal pump is now widely used in medicine, chemical, daily chemical, food, beverage, environmental protection, electricity transfer, dyeing, sewage treatment and other industries.
Stainless Steel Direct Centrifugal Pump Installation Instructions:
(1) the connection of the conveying pipe of the pump device, especially the connection of the input pipe, must be connected reliably and sealed well.
(2) the HYLZ self-priming pump does not need to install a bottom valve in the suction pipe within the self-priming range.
(3) if the conveying liquid is mixed with bamboo, wood, stone, metal and other hard objects which are too large or too long, a filter screen must be installed at the inlet of the suction pipe to prevent the above objects from being sucked into the pump and causing the motor or pump parts to be damaged by the jammed impeller.
(4) generally, the water pump device should have overload and short-circuit protection devices, such as fuse and over-current relay, and should adjust the setting position of the protection device according to the current of the motor nameplate.