Stainless Steel Gear Pump For Cooking Oil: By pump body, pump cover, impeller, etc the composition . All parts contacting with materials according to customer’s requirements by: SS304, SS316, SS316L, SUS304, SUS316, SUS316L and stainless steel.The pump diameter has: 1 inch, 2 inch, 3 inch, 4 inch, 6 inch, 8 inch, 10 inch, 14 inch.China KEMAI industrial pumps co., LTD. Provides you with high quality and good price stainless steel pumps, chemical pumps, screw pumps, magnetic pumps, submersible pumps, slag pumps, asphalt pumps, chocolate pumps, centrifugal pumps, moisturizing pumps, etc.
What is cooking oil?
Edible oil, also known as “edible oil”, refers to animal or vegetable oils used in the preparation of food.Liquid at room temperature.Because the reason such as the source of raw material, processing technology, quality, common cooking oils is vegetable fat more, including canola oil, peanut oil, fire, sesame oil, corn oil, olive oil, camellia oil, palm oil, sunflower oil, soybean oil, sesame oil, flax seed oil (til) oil, grape seed oil, walnut oil, peony seed oil, etc.
Stainless Steel Gear Pump For Cooking OilStructure:
Stainless steel gear pump is composed of gear, shaft, pump body, safety valve and shaft end seal.The gear has hardness and strength after heat treatment, and is installed with the shaft in a replaceable shaft sleeve.The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.
There are oil drain and oil return groove in the pump, is the gear in the work to bear the torque force is small, so the bearing load is small, small wear.
Performance Parameters Of Stainless Steel Gear Pump:
| Model | Caliber (Inch) | Flow (L/min ) | Pressure (MPa ) | Suction Lift (m ) | Motor power (KW ) |
| ZCK-18.3 | 3/4 | 18.3 | 1.45 | 5 | 1.5 |
| ZCK-33.3 | 3/4 | 33.3 | 1.45 | 5 | 2.2 |
| ZCK-55 | 1″ | 55 | 0.33 | 5 | 1.5 |
| ZCK-83.3 | 1 1/2″ | 83.3 | 0.33 | 5 | 2.2 |
| ZCK-135 | 2″ | 135 | 0.33 | 5 | 4 |
| ZCK-200 | 2″ | 200 | 0.33 | 5 | 4 |
| ZCK-300 | 3″ | 300 | 0.33 | 5 | 5.5 |
| ZCK-483.3 | 3″ | 483.3 | 0.33 | 5 | 7.5 |
| ZCK-483.3 | 3″ | 483.3 | 1.0 | 5 | 11 |
| ZCK-633 | 4″ | 633 | 0.28 | 5 | 11 |
| ZCK-960 | 4″ | 960 | 0.3 | 5 | 18.5 |
| ZCK-1200 | 6″ | 1200 | 0.6 | 3 | 37 |
| ZCK-1600 | 6″ | 1600 | 0.6 | 3 | 45 |
| ZCK-1800 | 8″ | 1800 | 0.6 | 2.5 | 55 |
| ZCK-2500 | 8″ | 2500 | 0.6 | 2.5 | 75 |
| ZCK-3800 | 10″ | 3800 | 0.6 | 2 | 110 |
| ZCK-5400 | 10″ | 5400 | 0.6 | 2 | 110 |
| ZCK-7600 | 14″ | 7600 | 0.6 | 2 | 200 |
| ZCK-9600 | 14″ | 9600 | 0.6 | 2 | 250 |
ZCK stainless steel gear pump features:
1. The electric pump is simple and compact in structure, convenient in use and maintenance.
2. With good self-imbibition, it is not necessary to infuse liquid before each pump.
3, lubrication is automatically achieved by the delivery of liquid, so there is no need to add additional lubrication fluid in daily work.
4, the use of elastic coupling to transfer power to compensate for small errors caused by the installation.In the oil pump work by the inevitable hydraulic impact, can play a good buffer.
Installation of gear oil pump:
A. Before installation, check whether the pump is damaged in transportation, such as whether the motor is damp, whether the dust cover at the pump inlet and outlet is damaged and whether dirt enters the pump chamber.
B. Clean the inner wall of the pipe with clean water or steam before installing the pipe.Installation should avoid the weight of the pipe to be borne by the pump, so as not to affect the accuracy and life of the pump.
C. The gear oil pump should be as close to the oil pool as possible;No leakage of air or liquid is allowed in the connection parts of the pipeline, or the phenomenon of not absorbing liquid will occur.
D. In order to prevent dirt such as particles and impurities from entering the pump, a metal filter screen should be installed at the suction inlet with a filtration accuracy of 30 mesh /in, and the filtration area should be more than three times larger than the cross-sectional area of the inlet pipe.
E. It is recommended to install vacuum gauge and pressure gauge for inlet and outlet pipeline to monitor the working status of the pump.
F. When the oil pool is deep, the suction pipe is long or the medium viscosity is high and the vacuum degree is too high, the inlet pipe can be thickened.When the suction pipe is longer, the bottom valve should be installed.