Stainless steel gear pump for sunflower oil, belongs to ZCK series Stainless steel gear oil pump, the material used: SS304, SS316, SS316L, and conveying material contact parts adopt Stainless steel material.It is specially used for transporting edible oil, diesel oil, gasoline, lubricating oil, olive oil, palm oil, etc.Model complete, good price, good quality, China KEMAI industrial pump co., LTD.Worthy of your trust.
Stainless Steel Gear Pump For Sunflower Seed Oil Structure Features:
Stainless steel gear pump is composed of gear, shaft, pump body, safety valve and shaft end seal.The gear has hardness and strength after heat treatment, and is installed with the shaft in a replaceable shaft sleeve.The lubrication of all parts in the pump is automatically achieved by using the output medium when the pump is working.There are oil drain and oil return groove in the pump, is the gear in the work to bear the torque force is small, so the bearing load is small, small wear.
The pump is provided with a safety valve as overload protection, the total backflow pressure of the safety valve is 1.5 times of the rated discharge pressure of the pump, can also be adjusted in the allowable discharge pressure range according to the actual needs.However, please note that this safety valve cannot be used as a pressure reducing valve for a long time.From the shaft overhang end to the pump, for clockwise rotation.
Stainless Steel Gear Pump For Sunflower Oil Installation:
A. Before installation, check whether the pump is damaged in transportation, such as whether the motor is damp, whether the dust cover at the pump inlet and outlet is damaged and whether dirt enters the pump chamber.
B. Clean the inner wall of the pipe with clean water or steam before installing the pipe.Installation should avoid the weight of the pipe to be borne by the pump, so as not to affect the accuracy and life of the pump.
C. The gear oil pump should be as close to the oil pool as possible;No leakage of air or liquid is allowed in the connection parts of the pipeline, or the phenomenon of not absorbing liquid will occur.
D. In order to prevent dirt such as particles and impurities from entering the pump, a metal filter screen should be installed at the suction inlet with a filtration accuracy of 30 mesh /in, and the filtration area should be more than three times larger than the cross-sectional area of the inlet pipe.
E. It is recommended to install vacuum gauge and pressure gauge for inlet and outlet pipeline to monitor the working status of the pump.
F. When the oil pool is deep, the suction pipe is long or the medium viscosity is high and the vacuum degree is too high, the inlet pipe can be thickened.When the suction pipe is longer, the bottom valve should be installed.
Stainless Steel Gear Pump For Sunflower Oil Performance Parameters:
| Model | Caliber (Inch) | Flow (L/min ) | Pressure (MPa ) | Suction Lift (m ) | Motor power (KW ) |
| ZCK18.3 | 3/4 | 18.3 | 1.45 | 5 | 1.5 |
| ZCK33.3 | 3/4 | 33.3 | 1.45 | 5 | 2.2 |
| ZCK55 | 1″ | 55 | 0.33 | 5 | 1.5 |
| ZCK83.3 | 1 1/2″ | 83.3 | 0.33 | 5 | 2.2 |
| ZCK135 | 2″ | 135 | 0.33 | 5 | 4 |
| ZCK200 | 2″ | 200 | 0.33 | 5 | 4 |
| ZCK300 | 3″ | 300 | 0.33 | 5 | 5.5 |
| ZCK483.3 | 3″ | 483.3 | 0.33 | 5 | 7.5 |
| ZCK483.3 | 3″ | 483.3 | 1.0 | 5 | 11 |
| ZCK633 | 4″ | 633 | 0.28 | 5 | 11 |
| ZCK960 | 4″ | 960 | 0.3 | 5 | 18.5 |
| ZCK1200 | 6″ | 1200 | 0.6 | 3 | 37 |
| ZCK1600 | 6″ | 1600 | 0.6 | 3 | 45 |
| ZCK1800 | 8″ | 1800 | 0.6 | 2.5 | 55 |
| ZCK2500 | 8″ | 2500 | 0.6 | 2.5 | 75 |
| ZCK3800 | 10″ | 3800 | 0.6 | 2 | 110 |
| ZCK5400 | 10″ | 5400 | 0.6 | 2 | 110 |
| ZCK7600 | 14″ | 7600 | 0.6 | 2 | 200 |
| ZCK9600 | 14″ | 9600 | 0.6 | 2 | 250 |