Stainless steel magnetic drive pump by the pump body, impeller, coupling, isolation sleeve, motor. Pump material have SS 304,SS 316, SS 316L.
Stainless steel magnetic drive pump Main parameters:
Flow range: 1.2m3/h-60m3/h.
Head range: 5m-50m.
Applicable medium: any concentration of acid, alkali, salt, organic solvent, etc.
Operating temperature: -20℃ – 150℃.
Our company can choose different configurations according to the actual conditions and provide accurate solutions.
SS Magnetic Pump USES:
The temperature of the input medium is -15~+100℃, the material is stainless steel, the density is no more than 1600kg/m3, the suction pressure is no more than 0.2mpa, the maximum working pressure is 1.3mpa, and the liquid without particles and fibers is transported.
Magnetic Drive Pump flow parts made of stainless steel (304, 316L), widely used in petroleum, chemical, pharmaceutical, electroplating, environmental protection, water treatment, national defense and other departments, is the transport of inflammable, explosive, toxic and valuable liquid ideal equipment, is to create no leakage, no pollution civilization workshop is the best choice.
Installation:
- Make the concrete foundation according to the size of the foundation, and bury the anchor bolts.
Put the unit on the foundation, align the level of the pump, and tighten the anchor bolts.
The pump should be as close to the tank as possible. - Valves must be installed in the outlet pipe of the pump to regulate the flow rate and make the pump work under the specified flow rate, so as to prevent the pump from working after overloading.
- The weight of the inlet pipe and outlet pipe shall not be supported on the inlet and outlet flange of the pump, and shall be fixed on their respective supports.
KEMAI CO.,LTD is stainless steel magnetic drive pump manufacturer is in China. Please tell me your flow head, liquid density, pump material. We will provide high quality and best price for SS magnetic pump.